Dear Expert

[mukesh.singh]

                  Dear Expert,

Can someone pls tell me the procedure or steps  to upgrade from UCS 1.4 to 2.0.

Much Thanks,

Mukesh

[Eric Rose]

This link will provide all of the information for your upgrade process. There is also some videos.

http://www.cisco.com/en/US/products/ps10281/prod_installation_guides_list.html

Thanks

Eric

[deepakkrssit]

Hello Mukesh,

Hope this helps.

1.       Activate UCSM

2.       Activate Server adapter (It will show as “Pending Next Reboot”)

3.       Activate server CIMC (CIMC will reboot and come up)

4.       Activate IOM (This will show as “Pending Next Reboot”)

5.       Activate Fabric Interconnect one by one starting with Secondary.

6.       After this secondary FI will reboot along with the IOM connected to that

7.       Do the same on primary FI

8.       Now all components except the server adapter will show as “Ready”

9.       All the components are now upgraded except server BIOS

10.    To upgrade server BIOS, create a service profile with BIOS policy with the right version

11.    Associate the service profile with the servers

12.    Server will reboot and come up with the upgraded BIOS and adapter will now show ready