Fabric Interconnect To MDS 9148 FC Port Channel/Trunks

[thehxman101]

Is it possible to create both a Port Channel and Trunk on a Cisco MDS 9148? Yes correct?

Or can I only trunk between the 2 MDS switches and not the MDS to Fabric Interconnect?

These FC links would be connected to a 2248XP Fabric Interconnect carrying multiple VSANs from the MDS to the Fabric Interconnect.

Thanks

[padramas]

Hello,

Yes, you can have trunk links grouped into port channel ( F port-channel trunking ) between FI and MDS.

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html

Padma