Unified Computing System Discussions

Hi,I am looking for a solution where I have to use / connect 2 pairs of Cisco UCS Fabric Interconnect 6248UP.Can anyone help me with solution for this. Like what I will require do this, any switch, router configuration change or something?If anyone h...

Hi, I try upgrading my Nexus 5548 with the release  5.1(3)N2(1b)But I see that the image is'y not compatibible with the module 1 !!!I followed the Upgrade and Downgrade Guide.Help me.********************************************** CLI  output ********...

Hello All, Looking for some guidance in order to develop a green field project, and appreciate any inputs. Client wants to virtualize most of his corporate applications, mainly microsoft deployment such as AD, Exchange, Webserver, DNS, NTP, FTP, etc....

Hi All,Just wondering if anyone has experienced the inconvenience of the Cisco UCS 210 Power Button. (attached Data Sheet).The Power button on the UCS 210, appears as an innocent power LED, and is protruding and very easily activated (even on my lapt...

i got some b200m2 half servers wit the vic 1280 card. then on the 2208xp iom, but i am using only 2 ports out of 8 ports on each module.so my total uplink is 40gb per chassis. how much do i get going to each server?

what are the steps to connect 2 FI 6248UP to a brocade dcx switch? I have a total of 6 FC Ports shown but they are configured as uplink ports. Should they be FC storage ports instead?I am not sure I need all 6 links to the dcx switch, so maybe 4 on e...

How do I associate a service profile to a pool of servers?  When I associate he profile, only one server gets it. Can only 1 server be associated to one profile at a time?

Hi Is the vmware esxi 5.1 Cisco media available yet?  I do not see it on vmware's download site.  Thank you.

HI Team ,VCE team suggested us to upgrade the following inorder to support it.Kindly suggest how to achive this.I am new to UCS & dont have enough knowlegde about it.Pls helpCisco C210 M2 firmware upgrade from 1.1(1d) to 1.4 (3c)2

I was able to install he 1000v. vem status on he esxi host shows as installed.but on the vsmshow module vem missing shows my esxi host in there.show module vem mapping shows nothingany idea?                  

Tomorrow I am going to a customer site in order to try to find out this:They successfully install ESXI to a LUN. They then patch the ESXi server, but as soon as they reboot the blade, all patches are lost and it boots up from scratch. Apparently.I wi...

According to interoperability matrix older Redhat's (5.5 & 5.6) are no longer supported - is it final truth or do i dare to update? Our environment needs support for VIC-1225 and single wire management sure would be nice and at the same time we have ...