03-21-2013 09:32 PM - edited 03-01-2019 10:56 AM
Hi, Cisco Experts:
Can I have a definitive answer to the following?
q1.
EMC mentioned that they do not support FC Port Channel & Trunking with regard to our UCS Fabric Interconnects/MDS/VNX5300?
Is that any truth in that?
We are trying a Cisco UCS solutions with MDS and EMC VNX in the mix-SAN Boot basically, ESXi 5.1 and all others.
q2.
From MDS all the ways up to EMC VNX, is there such concept too-FC Port Channel & Trunking, assuming we are doing FC Port Channel & Trunking from FInterconnect to MDS?
Please let me know.
Appreciate it.
SiM
03-22-2013 12:18 AM
Hi Sim,
We support FC port channel and trunking between UCS FI and MDS.
Is EMC saying about the port channel between the MDS and VNX? Is there any document EMC pointed out?
With respect to booting from SAN, yes, you can boot from SAN with MDS and EMC VNX as long as the OS is supported in the UCS system. You can refer to
http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html for the supported OS versions.
Hope this answers your question.
-Ganesh
03-22-2013 05:53 AM
Hello SiM,
SAN port-channel and VSAN trunking is only possible between Cisco devices as they are proprietary features. EMC storage would have to be connected in traditional way.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide