Unified Computing System Discussions

Hi all,  I am attempting to boot a host over iSCSI but have run into a brick wall trying to get my host to boot after successfull install of the OS.Without changing the service profile I am able to install and boot VMWare ESX fine.  Windows just does...

Hi,I have UCS system with Cisco B200 M3 servers. Each server has 2x Toshiba 300Gb HDD.From the start, Service profile for server was configured with "Any Configuration" storage policy and Linux was installed on server.Now, we want to install one OS t...

I am conducting testing on our Fibre Channel infrastructure before we bring some new systems online. During the FC testing, I noticed some odd behavior that I don't think should be happening. Configuration:2x UCS 6248 FIs, 2.0(4a)2x MDS9148 5.2(2a)B2...

Hi Folks,Sorry for the newbie question..Just want to know what command do I use on the FI to display its config?Thanks

where can I get an ordering guide for Unified computing?.Thanks          

Hi guys, we have a UCB C200 M3 and server 2012 + hyper-v 3.0 failover clusterwe set up a simple topology where we have on its servers (2012) 02 nics (one for hyper-v hosts and other for VM´s virtual switchwhen we restart the servers for updates or ma...

I'm a network guy, not VMware.  There are benefits to having the Nexus 5Ks vPC'd together and have a single port channel going upstream to a pair of vPC'd 7Ks.  I've heard this refered to as a 'bowtie' or 'figure 8'.Are there similar benefits with th...

Hi,I have one UCS-B chasis. In the Fan status, I have one fan module with a weird status:Operability - OperablePerformance - N/APower - OnTemperatura - N/AI attach printscreen. Any idea what's going on?Thanks in advance,Ruben

I have a working UCS infrastructure and will be adding a new type of blade server. Was advised to use UCSPE to model out the service template building and hardware profile adding processes.I performed a full-state backup of my production UCS and save...

Hi All,We have a scenario here, which EMC support claim that they've see this elsewhere. There is 1 units of CISCO UCS B200 M1 (Palo) with 4 Blades connecting to CISCO Fabric Interconnect 6120XP.CISCO Fabric Interconnect 612XP has configured with UPL...