FEX Interface with Status FABRIC UP

[daniel_dantas]

After apply the configs to create a new FEX connections, I see the following FEX Status: Eth1/25 - Interface Up. State: Fabric Up

Below, the messagens from Show Tech

#LOGS

2017 Oct 19 15:45:39 SWITCH %$ VDC-1 %$ %NOHMS-2-NOHMS_ENV_FEX_ONLINE: FEX-127 On-line
2017 Oct 19 15:45:41 SWITCH %$ VDC-1 %$ %PFMA-2-FEX_STATUS: Fex 127 is online

#CHASSIS

NAME: "FEX 127 CHASSIS", DESCR: "N2K-C2248TP-1GE  CHASSIS"

#Configuration of Ethernet Interface:

interface Ethernet1/25
description ## GB26-04-FEX-127 ##
switchport mode fex-fabric
fex associate 127
channel-group 127

FEX: 127 Description: GB26-04-FEX-127 state: Online
FEX version: 7.0(6)N1(1) [Switch version: 7.0(6)N1(1)]
FEX Interim version: 7.0(6)N1(1)
Switch Interim version: 7.0(6)N1(1)
Extender Serial: 00000000000
Extender Model: N2K-C2248TP-1GE, Part No: 73-13232-02
Card Id: 99, Mac Addr: 00:9e:1e:69:00:82, Num Macs: 64
Module Sw Gen: 12594 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/24
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
Po127 - Interface Up. State: Active
Eth1/24 - Interface Up. State: Active
Eth1/25 - Interface Up. State: Fabric Up
Fex Port State Fabric Port

Thanks all for any response

[Wes Austin]

Try to use a different SFP or swap a known working SFP into that port.

Also try to use a different NIF on the FEX. (Network Uplink)

You could also try a reload of the FEX if you do not want to use another port. It seems that interface is not getting programmed correctly.

[daniel_dantas]

Thanks for your response.

Let's check and then I'll report the result

[daniel_dantas]

Hi there,

The problem remain the same, anybody has another suggestion?

Thanks