Hi Team, Is there any way to enter Rack information manually of CISCO B-series blades in UCS Manager or UCS central ? Thanks Vaibhav A.
Hi Team, Is there any way to enter Rack information manually of CISCO B-series blades in UCS Manager or UCS central ? Thanks Vaibhav A.
With in UCS manager and under Equipment, Chassis, Chassis #, IO Modules, IO Module #, Backplane Ports, why I only see the ODD number ports? Is it because there is only VIC1340 card installed in the B200M4 blades? If so, will the EVEN number ports sho...
Dear everyone, We are sizing Cisco UCS for our new system. We wonder if there is any recommendation for "uplink : downlink" ratio that we should consideration? Or more generally, is there any best practice to calculate FI's uplink? Thanks in advance!...
Hi Guys , We have a POD with old FIs [you can see model & firmware on screenshot "fi-model-firmware"] We got a critical error that says that "ETH_PORT_ACTIVATION_PKG" has been expired [see screenshot "as-error-01"] I downloaded licenses from cisco si...
i currently have a ucs mini. I want to add two additional chassis. Since with the ucsmini we have the Fi6324, can i remove the FI6324 from the ucs mini and replace it with a fex2204 which will be connected to an external FI.+ the external FI will ca...
i cannot delete a backup I have in ucs. any idea? I cant modify it
I am trying to install ucs director 6.5 Successfully deploy the OVF, but after I power on the vm the centos OS is not booting and immediately i get an error wrong fs type, bad option, etc...
After troubleshooting an issue from an already open question, a new issue has arisen. I am opening a separate question as this problem is new and I figured a new question should be asked about it.Following the instructions from this question, I re-a...
we are having CISCo UCS environment(8 ports backplane ports-->IO module) where im seeing the 9th port(i.e in chasis 1--->1/1/9 port is belonging to "SAM management VLAN".What it is referring" we are having another CISC0 UCS environment(16 ports backp...
Hi, This is Jaeyul Kim. I have some questions. I support to 6248 FI and In my customer site, There is 16G SFP to 6248. I already known that support FC 4/8G SFP, but I have done check unsupported 16G SFP entered this product. (not print part number...
Hello- Today while performing an upgrade from 2.2(6e) to 3.1(3b) we had a major outage during the reboot of FI-B. The outage cleared after the 10 or so minutes it took for FI-B to restart. At first, I thought we maybe had some of our servers config...
I read the symptoms and conditions of this bug, so I'm clear on that. High memory usage cause SNMP not to work. OK, then. My question is why would diagnostics, such as SNMPWalk or 'Test Credentials' in my NMS system, work when actual polling does not...
Stumbled upon an interesting misconfiguration which is making me curious about how the boot from SAN primary/secondary method functions.Array has a boot LUN for a server at targets available as LUN ID 1 across all targets.Boot policy for a vHBA has c...
Hi all, I am doing an implementation on behalf of a third party who advised me that they ordered 2x copies of MS Windows Server 2012 Standard R2 off the Cisco GPL. In the delivery I received 2 copies (media) of Windows Server 2012 but no license keys...
We encountered board controller activation failed on one UCS blade (B200 M4). Is that possible to downgrade from version 12.0 to 7.0? Others blade running version 7.0 with no activation issue. Kindly advice. Regards, Zulhadi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-15-2024 11:16 AM | ||
08-15-2024 08:03 AM | ||
08-14-2024 07:32 AM | ||
08-02-2024 03:36 AM | ||
07-23-2024 08:42 AM |