how to configure mutiple subnet ip range in UCS Setup

[sanmaria]

i already had one subnet with /24 which is configured and working fine in one of my ucs setup .we are having a few ips in this setup .i want to know how to configure one more /24 subnet in this ucs setup with out affecting the existing setup .Because existing setup having a lot of VMs .

Thanks & Regards'

Sanjeevi

[abbharga]

Hi Sanjeevi,

In UCS all you need is to add / define the VLAN in the UCSM, make it a global VLAN which will define it on both the FI.

Once that is done, you can add the vlan to the vnics on the service-profile which are used for the servers running the VMs.

Hope this helps!

./Abhinav