How to shutdown safely my UCS?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-10-2019 07:01 PM
Hello guys
I have a CUCM 10.5 running over UCSC-C220-M3SBE and I want to know how Can I turn off my UCS in a safe mode.
I really don't know so much about UCS but I have made a little reseach and I found that I can turn off my UCS using the Cisco Integrated Management Controller (CIMC) is that correct?
If this is correct I want to know this:
1) The CICM is a separate unit of the UCS?
2) If I shutdown my server from here I still be able to access the CICM to turn it on back?
3) Is there any danger that my UCS don't turn it on back using this method?
- Labels:
-
UCS Manager
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-10-2019 08:21 PM
Cisco Integrated Management Controller (CIMC) - You use this to shutdown the Server, and you can turn them back using CIMC.
This like KVM or ILO (in traditional world).
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2019 09:19 AM
Hello
Ok thank you for your response, I know now I can shutting down and turn on the UCS using CIMC
.
But which option should I use to shutdown UCS. the Power Off Server Option or Shut Down Server Option? what is the diffence between them ? and I suposse in both case the CIMC will be available right?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2019 09:55 AM
Shutdown server will initiate a soft shutdown and Power off will be a hard shutdown.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2019 10:33 AM
Thank you for clarify me the diference.
In both case after I apply Turn Off Server or Shutdown Server the web access to CIMC will be available?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2019 11:19 AM
yes CMIC available for you.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-29-2022 11:36 AM
Hi, I have been reading and I found the answer interesting although I recently manage a UCS C220 M5 and that option of Power Off Shut down does not appear to me. I'm told that that shutdown option is in Host Power (top right of CIMC) and then Shut Down for full shutdown. We want to move it from place to place. That's right? Thanks a lot
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2019 09:20 AM
Hello
Ok thank you for your response, I know now I can shutting down and turn on the UCS using CIMC
.
But which option should I use to shutdown UCS. the Power Off Server Option or Shut Down Server Option? what is the diffence between them ? and I suposse in both case the CIMC will be available right?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-01-2019 08:48 AM
depends on your intent to do
