cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4583
Views
0
Helpful
8
Replies

Issues installing a new Cisco UCS 2208XP card in 5508

rickysahni
Level 1
Level 1

Hi,

 

I have today installed a new IO Module into one of our chassis (2208XP into a 5508 Chassis).  But it has not come online.  There are lights on the IO module, however uplinks from that to the FI are down.  The ports on the FI are down.

Error messsages i get are:

On the chassis i get error 'fabric-conn-problem iocard-inaccessible iocard-inoperable'

I have already tried re-acknowledging the chassis but this did not help.  I have checked the chassis discovery policy and it is only set to 1 link.

I have already tried resetting the IO module, this has not made a difference.

I also get error 'end-point-unavailable Code: unspecified Message: no connection to MC endpoint' on the IOM.

Really not sure what else i can check.

This IOM stopped working when we had a power cut in our data centre, we then go an error on the IOM saying 'current connectivity does not match discovery policy or connectivity is not supported: unsupported-connectivity'

any ideas?