01-16-2016 09:44 AM - edited 03-01-2019 12:33 PM
Does anyone have a good detailed guide in setting up Jumbo Frames on my UCS domain, I just want to make sure I haven't missed any steps.
Solved! Go to Solution.
01-16-2016 09:46 AM
Hi Mark,
This is a guide I use and it hasn't failed me yet.
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-b-series-blade-servers/117601-configure-UCS-00.html
Let me know if you have any other questions. If there is no preference I would recommend to use Best Effort this simplifies the upstream configuration.
Regards,
Qiese Dides
01-16-2016 09:46 AM
Hi Mark,
This is a guide I use and it hasn't failed me yet.
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-b-series-blade-servers/117601-configure-UCS-00.html
Let me know if you have any other questions. If there is no preference I would recommend to use Best Effort this simplifies the upstream configuration.
Regards,
Qiese Dides
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide