12-26-2023 12:43 AM
Hi,
I am having a weird issue with KVM Launching in a B200 M5 Blade. When I am trying to launch the console without the service profile, I can get to the console normally, whereas when I am launching the console post association of service profile. I am getting the blank page in the console which is not helping further to perform OS installation on the HW. Please can someone help me with this issue.
Blade Model and its running version: B200 M5 with 4.2(3g)B
Attached the Blank Page I am seeing.
12-26-2023 01:48 AM
Here are some steps you should try: this may be helpful for you
Thanks
12-27-2023 02:56 AM
Hi,
As I am facing with only one blade in the environment whereas other servers with the same firmware and environment are working good as expected.
02-23-2024 10:52 AM
Did TAC resolve this issue? What was the solution?
03-08-2024 07:59 AM
I put in a TAC case myself and for future reference the fix for mine was this.
Under chassis view, go to the server. Just above the link to open the KVM view, click recover server. Pick reset KVM and ok, then recover server again and reset CIMC. A minute or so after those reset the KVM was all good again.
03-18-2024 06:45 AM
I have replaced the Motherboard which solves the issue for me along with TAC troubleshooting's.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide