not able to attach a service profile

[michael.leahy]

Guys

i have a service profile that has 6 nics, 10 hba's and a boot order of local disk first and then cd and then lan

When i try and assign this to a B200 M3 or B420 (both have local disks) then i get the error "there are not enough resources overall, server unavailable"

when i change the boot policy of the service policy to just boot from cd / dvd then i can assign it fine

also if i create a new boot policy with the local disk etc then that adds fine too 

what would be causing this ? ?

note : i fixed this by just unbinding the SP from the template, rebinding it and then applying it and it worked ok - is this exepcted behaviour ? 

[Walter Dey]

Hi Michael

Can you please post a screenshot of the error message !

Which I/O adaptor ?

Which UCS version ?

Did the blade a successful discovery ?

Walter.

[michael.leahy]

blades were discovered ok

ucs 2.2(6e)

I/O M81KR

The config was restored from one set of FI's to the current one, is that why i have to unbind the SP from the template, rebind and then apply ? Are they locked in some way ? 

[Walter Dey · Accepted solution]

Which OS ?

Please check the interop matrix

http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

to verify that M81KR is still supported !

I can't find B200-M3 and M81KR in

http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/b_hcl_B_rel2-26.pdf