08-08-2017 10:58 PM - edited 03-01-2019 01:16 PM
i have 3 B200M4 installed in chassis with 6248UP FIs , 2 are ok with Service Profiles associated , one of them stucks at 59% in the process of BIOS Post Completion. my UCSM Version is 2.2(8c) , and Bios of all 3 servers are the same ,
any help would be appreciated
08-09-2017 04:25 AM
What is the BIOS version on the servers?
08-09-2017 06:32 AM
The last time I had this exact same issue it turned out to be a faulty memory module. So you’ll have to remove memory and test each modules to see if you can get to bout and complete the update
08-09-2017 06:37 AM
Its unlikely that you have a bad memory module on 3 servers.
Are you using v4 processors on the servers? If so, you must upgrade the BIOS to the minimum supported version.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide