one of vhbas fcping problem

[liuqieccom]

dear experts;

I meet a problem.I creat two vhbas in my B200M3 server .one of my vhbas cannot fcping in the SAN switch(the other vhba is normal )，however SAN switch can see it(show npv status in FI is normal,VIF path is up)，just cannot fcping,and we cannot see storage on this side in OS.

  OS is redhat 6.1,FI is 6248 in NPV mode,SAN switch is Brocade 48000.other servers in the same chassis is normal too.

  is there anyone can give me any advices,thanks very much!!

[padramas]

Hello,

Can you please re-check zoning ( Brocade )  for the non-working initiator ?

Padma

[dongxugang]

HI,padramas

  we have checked it many times,it should be correct.

  even there are no zoning,fcping vhba in Brocade 48000 should be OK

  thanks

[dongxugang]

what makes me very strange is that storage can see the non-working vhba