cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
116
Views
0
Helpful
1
Replies

Problems to Update VMware ESXI Custom Cisco

jorgeg83
Community Member

Hi there, 

I'm looking for a custom Cisco ISO of ESXi 6.7u3 or possibly version 7.0, as those versions are no longer available on Broadcom's site currently. I'm running VMware ESXi 6.7.0, build 10302608, and I want to upgrade to ESXi 8.0u3 custom Cisco. However, I'm not sure if a direct upgrade is possible or if I first need to upgrade to version 6.7u3 or 7.0 before moving to 8.0u3

I attempted to upgrade directly to 8.0u3, but it threw several errors. For example:

Unable to download VIB: This may be due to network problems or the specified VIB does Not exist or does Not have a proper 'read' privilege set. Make sure that the specified VIB exists and can be accessed from vCenter Server.

These VIBs on the host do not have the requiered SHA-256 checksum for their payloads: NetApp_bootbank_NetAppNasPlugin_1.1.2-3 Thiswill prevent VIB security verification and secure boot from functioning properly.

Please remove these VIBs and contact your vender for replacements.

Thanks!

 

1 Reply 1

Oliver Koenig
Level 1
Level 1

Upgrading directly from ESXi 6.7.0 (build 10302608) to ESXi 8.0 Update 3 (8.0u3) is not supported as a direct in-place upgrade.

Here's why:

  • VMware supports direct upgrades only from ESXi 7.0 and later to ESXi 8.x.

  • ESXi 6.7 → 8.0 is not a supported direct upgrade path, even though the installer may technically allow it.


Recommended Upgrade Path:

To upgrade from ESXi 6.7.0 to 8.0u3, follow this two-step upgrade path:

  1. Upgrade from ESXi 6.7.0 → ESXi 7.0 Update 3 (latest)

  2. Then upgrade from ESXi 7.0u3 → ESXi 8.0u3

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card