03-28-2016 12:11 PM - edited 03-01-2019 12:40 PM
Hi,
Could I use the QSFP port in UCS MINI FI 6324 as uplink port to connect to either QSFP port in Nexus switch or 4 x 10 Gbps SFP+ in Nexus switch?
03-28-2016 01:52 PM
Hi Amr
The QSFP port can only be used to connect to a secondary chassis, rack servers, or storage.
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/ucsmini-specsheet.pdf
Walter.
03-28-2016 02:58 PM
Hi Walter
Cisco Data sheet and specs sheet mentioned that port support Ethernet and FCoE, an thw uplink port is Ethernet
So, why this port could not work as uplink port ?
also, this port support FCoE storage only so we could not connect FC storage directly
could we connect this port to MDS
03-29-2016 12:59 AM
The 4 SFP+ ports are universal and support classical FC.
The specs clearly says
The QSFP port can only be used to connect to a secondary chassis, rack servers, or storage.
Although this ports are Ethernet, they are restricted to the above configuration.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: