05-14-2012 12:40 AM - edited 03-01-2019 10:24 AM
First Question about the FCoE Direct Attach If I have EMC Storage with FCoE interfaces
and I want "FCoE Direct Attach" to FI-6248 "Without Upstream Switch" (MDS or N5K). Will it work ? if I "Enable Default Zoning" in UCS Manager
Second Question about VIC 1240. Speed of Fibre Channel Traffic in VIC 1240.
I know that M71KR has 4 Gbps of FC Traffic and M72KR has 8 Gbps of FC Traffic.
Thank you.
05-14-2012 12:59 AM
Please refer to UCS Version 2.02
Thank you
05-14-2012 01:20 AM
Hello,
For the first question, it is NOT supported.
It might work if we enable default zoning but it is not recommended.
The next major release is expected to support direct attach storage.
Padma
05-14-2012 06:26 AM
Hello Attavit,
For the Cisco VICs ( M81Kr / 1280 / 1240 ) , the vHBA speed is limited by the physical interface speed.
It is 10 Gbps and system can utilize the whole pipe ( 10 Gbps ) if it available.
http://www.cisco.com/en/US/prod/collateral/modules/ps10277/ps12377/data_sheet_c78-699459.html
HTH
Padma
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide