08-11-2014 10:16 AM
Hello,
Planning to do 1G iSCSI boot from SAN on UCS. Wanted to find out if this is doable.
Best Regards,
Rags
08-13-2014 09:21 AM
Yes, it is quite doable. Depending upon what operating system you plan to boot, the process will obviously vary. What OS do you want to boot?
08-13-2014 09:22 AM
Thank you Timothy. Planning to install ESXi 5.5
Thanks,
08-13-2014 09:28 AM
This document - Cisco Virtualization Solution for EMC VSPEX with VMware vSphere 5.1 for 100-125 Virtual Machines - Cisco - contains information on how to set it up. I believe it is using 10 GE, but the process is exactly the same. It contains a lot of other information, too, but it does give instructions for setting up iSCSI boot for ESXi 5.1. Should be the same for 5.5.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide