Hello,I'll be doing a Hyper-V Core 2012 installation based on B200M3 and I have a few questions:- Is it supported (or a good idea) to boot Hyper-V2012 from SD (flexflash)?- is there a documented procedure to install the OS in the SD flashes? Apparent...
When I go to the UCSM LAN tab under Internal LAN, I do not see any port channels there. why is that? but if I log into the ucsm cli, I see some sh port-channel summaryFlags: D - Down P - Up in port-channel (members) I - Individual H...
Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts V...
I am wondering if it is possible to install VMware tools on the UCS Central appliance? We're running version 1.1(1a) of the appliance. The OS type appears to be RedHat, but the CLI is not the standard linux interface, so I don't see a way to mount an...
We have setup netflow according to the docs but are not seeing any traffic flow.6248's running 2.2 MR1 betaHost is ESXi 5.5, using a C220 M3, VIC1225. Have set monitoring for vnic0 and vnic1 to an external monitor. VMs are communicating to other ho...
We have our UCS environment connected to an upstream FC SAN fabric which contains an all flash based SSD array. I don't believe that the UCS is fully taxing the array and have noticed that the queue depth within esxtop->u is showing DQLEN 32 for LUN...
I have blades with these 3 different adapters M81KR looks like has only 2DCE interfaces and ESXi is showing 10GBps Full duplex VIC 1240 shows it only has 4 DCE Interfaces but they were numbered in ucsm as 1,3,5,7 instead of 1234. why?in ESXi it show...
Hi - We are using ooDefualt layout which includes ANI and DNIS,In CAD for few calls we are getting ANI as Extn No and for few calls ANI as System, But in BACustomerNumber we are getting DNIS info for all the calls without any issue.CTI SRV logs dosen...
I have provisioned a VMware environment for Cisco Prime. The Network Engineer has already created the Prime 2.1 VM. However the environment created is a 5.5 environment. Now there is some doubt as to Prime 2.1 is supported on VMware 5.5. At present t...
We have to replace the self-signed SSL certificates that come with our C220-M3 CIMC with some server certificates from our internal CA server. Is it possible to do this? I tried importing the certificates, but an error was generated stating that th...
Hi All,just received 2 x 6296 FI's with 2208 IOM's with 12 cables. I though that there was a "order" on the cable config from the IOM to the FI's ? either 1,2,4,8 cables? is that correct or can I use 6 cables from each IOM? We currently have 4 blade...
I have a critical error after deleting som old firmware packages on the Interconnects.Interconnect B shows now a Critrical error: sys/switch-B/nfs-mount-inst-externalBackupRepositoryFSM FAILED Mount NFS Interconnect A does not have this error. anyone...
