cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
603
Views
0
Helpful
3
Replies

UCS 8501 & UCS C220 M

opnineopnine
Level 1
Level 1

Hi all 

I have a UCS 8501, and two C220 M , the last 2 will be reinstalled with Linux, my question is ,there any way I can configure the 8501 to manage the  C220?

Thanks.

1 Accepted Solution

Accepted Solutions

Paul Felts
Cisco Employee
Cisco Employee

Hello, 

Please review the following documentation: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html

Hope this helps, 

-AJ Felts

Cisco TAC

View solution in original post

3 Replies 3

Paul Felts
Cisco Employee
Cisco Employee

Hello, 

Please review the following documentation: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html

Hope this helps, 

-AJ Felts

Cisco TAC

Hello Paul,

Thanks for you help, please let me ask you one thing so I can be sure I get this, I can connect my UCS 1110x directly to the Fabric, my UCS 2.2 will see this like a server or a disk ?

thanks !

Hi, 

Integration of 1110x is not supported. Only standalone C-Series servers are supported. The 1110x doesn't fall into the stand alone category. 

When you integrate a normal C-Series server, it appears just like a blade, however it appears under "Rack-Mount" instead of "Chassis".

-AJ Felts
Cisco TAC

Review Cisco Networking for a $25 gift card