UCS-C220 Booting Issue

[kshong]

Hello Everyone.

I am using UCSC-C220 but I have a booting problem.

I checked HDD from CIMC

I think, there is no fault from Hardware.

Could Raid Setting  be reason of this kind of problem?

Also, I could not fine Raid Controller in Booting order.

Please, share your experiences if you have solutions.

Thank you.

[Wes Austin]

If using 4K drives, you will need to use UEFI mode. Take a look at this:

https://supportforums.cisco.com/t5/unified-computing-system/cisco-ucs-c220-m4-how-can-i-boot-with-the-cisco-sas-12g/td-p/2893395