05-08-2014 07:20 PM - edited 03-01-2019 11:39 AM
Hello,
I have a UCS C220 M3 server. with 8 hard drives in it. I am going to install only CUCM and Unity on this server. (4K users).
The server comes without RAID configuration.
Cisco recommends RAID 5. I hoped use a RAID 6.
The space is reduced from 1.9 to 1.6.
Could there be any further problem when using RAID 6 on this server?.
Solved! Go to Solution.
05-08-2014 10:33 PM
Hi jcontreras,
You want to make sure you follow Cisco recommendations to continue getting support from TAC in case you run into any problems with your set up.
Please take a look at the post below, see first comment from Daniel Laden.
https://supportforums.cisco.com/discussion/11692236/ucs-c220-m3-raid-configuration
Let me know if this help
05-08-2014 10:33 PM
Hi jcontreras,
You want to make sure you follow Cisco recommendations to continue getting support from TAC in case you run into any problems with your set up.
Please take a look at the post below, see first comment from Daniel Laden.
https://supportforums.cisco.com/discussion/11692236/ucs-c220-m3-raid-configuration
Let me know if this help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide