UCS Central Registration error due to IPV6

[garydawes1]

I've installed and configured UCS Central and registered a copy of the UCS emulator with it successfully.

When I attempt to register the production UCS systems, I get the following error

Current UCS image version does not support registration to UCS central using IPV6

I cannot find the setting I need to modify.

The UCS managers are running 2.1(1a) and UCS Central is 1.1 (2a)

Thanks

Gaz

[Jeffrey Silberman]

Hi Gaz,

You will need UCSM 2.2(1) for IPv6.

https://communities.cisco.com/community/technology/datacenter/ucs_management/blog/2013/12/18/ucs-manager-221-el-capitan-released

If you're running UCS Central, you might want to pick up the latest/updated Best Practice Guide as well

https://communities.cisco.com/docs/DOC-35264

Hope this helps,

   -Jeff

[Jeffrey Silberman]

My bad.

IPv6 is not supported in UCS Central until the upcoming maintenance release for UCSM, "scheduled" for end of May.

Sorry for the confusion.

-Jeff

[garydawes1]

We're not running IPV6 nor want to.

I am looking to disable whatever setting I need to so I can register the UCS Managers with UCS Central using IPv4

[Jeffrey Silberman]

One problem for starters is that UCS Central 1.1(2a) requires a minimum of UCS Manager version 2.1(2a) as a minimum.     That may be the main problem --- despite the misleading error message.   Please let me know if the problem goes away after upgrading, and I'll open a bug to get the message fixed.

Please be sure to check out the release notes: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/RN-CiscoUCSCentral_1-1.html

and the Best Practice Guide

https://communities.cisco.com/docs/DOC-35264

Hope this helps,

   -Jeff