UCS-FI-6454 Support for 10GBASE-T

[Professor_Pickles]

Howdy Folks, 

Can anyone confirm if the UCS-FI-6454 can support a copper 10GBASE-T SFP+ module, specifically the SFP-10G-T-X? So far, all I've check the optics compatibility matrix and the 6400 spec-sheet and I see no mention of this module being supported. This seem odd to me, but before I go on a wild goose chase, I figured out ask the community. 

Thanks y'all. 

[Kirk J]

There was some conversations a couple of years ago about potential 'uplink' support on 6454, but have never seen that show up in the UCSM release notes or FI spec sheets.

The compatibility matrix for it (https://tmgmatrix.cisco.com/tmg?tpid=961) only shows some specific server adapters and a few Cat 9500 series support.

I'm guessing there wasn't enough UCSM customer requests for it.

Kirk...

[WUR]

Please check this : https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/unified-computing-system-adapters/datasheet-c78-741130.html

https://andovercg.com/datasheets/cisco-ucs-6400-series-fabric-interconnects-datasheet-c78-741116.pdf