cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
382
Views
0
Helpful
1
Replies

UCS M7 and VMware vSAN

rick.mancinelli
Level 1
Level 1

All,

We have deployed many VMware vSphere / vSAN clusters over the years on UCS M5 and M6 hardware.  In those cases, the Cisco HBAs were always on the VMware vSAN HCL.  In the case of the UCS M7 series, the only HBA available is the UCSC-SAS-T-D, and this is NOT on the vSAN HCL (for Original Storage Architecture / OSA).

I've reached out to VMware, and they say the information on their HCL is supplied by the vendors, or Cisco in this case.

Has anyone successfully deployed vSAN on a UCS M7 / UCSC-SAS-T-D configuration?

Best,

Rick

 

1 Reply 1

Looking at the VMware Compatibility Guide for Model : HY6-CISCO-UCS-C220-M7S I see

Controller
Model : UCSC-SAS-M6T Cisco 12G SAS HBA (16 Drives)

which is different from the UCSC-SAS-T-D you mentioned. Is this controller an option for you? 

Review Cisco Networking for a $25 gift card