11-27-2018 01:45 AM
we are planning to upgrade UCS Manager from 2.2(6f) to 3.2(2f). I want to know what are the things that need to be checked before the upgrade. There are 10 Chasis, FI model is 6248UP. servers are B200M3 and B200M4.
Solved! Go to Solution.
11-27-2018 01:59 AM
Hi @SrikanthV,
Best is to check release notes and upgrade guide( guidelines & prerequisites in upgrade guide)
Release notes: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-2.html
Note: To go on 3.2 you need step upgrade, i.e. from 2.2(6) to 2.2(8) and then to 3.2. (Check "Table 6. Upgrade Paths to Release 3.2" in upgrade guide)
Hope this helps.
Regards,
MJ
11-27-2018 01:59 AM
Hi @SrikanthV,
Best is to check release notes and upgrade guide( guidelines & prerequisites in upgrade guide)
Release notes: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-2.html
Note: To go on 3.2 you need step upgrade, i.e. from 2.2(6) to 2.2(8) and then to 3.2. (Check "Table 6. Upgrade Paths to Release 3.2" in upgrade guide)
Hope this helps.
Regards,
MJ
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide