06-12-2014 06:30 AM - edited 03-01-2019 11:42 AM
C220 M3 server shipped with 1.5(4d). Looking to upgrade to ucs-c220-huu-2.0.1a. This is the recommeded release on cisco.com. Anyone have experience or recommendations on this? Should I use v2.0.1a and/or enable secure boot? Thanks!
Solved! Go to Solution.
09-09-2014 11:21 PM
If you're talking about Secure Boot then I'm assuming you're talking about UEFI.
If so, and you're planning on running VMware, you may want to look at 2.0(3d)1 that came out a couple of days ago. This has a fairly critical fix that fixes an issue where the onboard LOM's won't detect and load drivers properly in VMware when the system is booted with UEFI (this will prevent you installing VMware under UEFI - but it will work under legacy BIOS). 2.0(1)a still has this bug.
I'm running 2.0(3d)1 and it seems to be good so far.
09-09-2014 11:21 PM
If you're talking about Secure Boot then I'm assuming you're talking about UEFI.
If so, and you're planning on running VMware, you may want to look at 2.0(3d)1 that came out a couple of days ago. This has a fairly critical fix that fixes an issue where the onboard LOM's won't detect and load drivers properly in VMware when the system is booted with UEFI (this will prevent you installing VMware under UEFI - but it will work under legacy BIOS). 2.0(1)a still has this bug.
I'm running 2.0(3d)1 and it seems to be good so far.
09-15-2014 11:43 AM
Thanks for the feedback. I ended up deploying this server on 2.0(1)a without enabling secure boot and had no issues with the deployment.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide