01-21-2016 02:43 AM - edited 03-01-2019 12:33 PM
I want to know the known issues and there resolution while upgrading from 2.1 2a to 2.2 6d.
Solved! Go to Solution.
01-22-2016 07:38 PM
Hi,
beyond what Walter Dey already said ... my recommendations:
1) check first the Release Notes for 2.2
2) first upgrade to version 2.1(3g) and then to version 2.2(6d)
Hope this helps
01-21-2016 03:39 AM
Not quite the same, but read
https://supportforums.cisco.com/discussion/12745436/upgrade-failure-223d-226d
Walter.
01-22-2016 07:38 PM
Hi,
beyond what Walter Dey already said ... my recommendations:
1) check first the Release Notes for 2.2
2) first upgrade to version 2.1(3g) and then to version 2.2(6d)
Hope this helps
01-23-2016 10:43 PM
Is there any know issue upgrading from 2.1 2a to 2.2 6d directly.
01-23-2016 11:33 PM
Checking
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/upgrading/from2-1/to2-2/b_UpgradingCiscoUCSFrom2-1To2-2.html
I can't find a reason why this should not be possible.
Walter.
01-25-2016 03:29 PM
Hi,
take a look at the Internal Dependencies info, there is a 'Recommended Minimum Software Version' column ... version 2.1(3g) appears in 'Servers' and 'Adapters' ... I always prefer to upgrade first to the recommended minimum.
Hope this helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide