Upgrade from 2.1 2a to 2.2 6d

[ajaypatil1]

I want to know the known issues and there resolution while upgrading from 2.1 2a to 2.2 6d.

[Walter Dey]

Not quite the same, but read

https://supportforums.cisco.com/discussion/12745436/upgrade-failure-223d-226d

Walter.

[Marcelo Morais · Accepted solution]

Hi,

 beyond what Walter Dey already said ... my recommendations:

1) check first the Release Notes for 2.2
2) first upgrade to version 2.1(3g) and then to version 2.2(6d)

Hope this helps

[ajaypatil1]

Is there any know issue upgrading from 2.1 2a to 2.2 6d directly.

[Walter Dey]

Checking

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/upgrading/from2-1/to2-2/b_UpgradingCiscoUCSFrom2-1To2-2.html

I can't find a reason why this should not be possible.

Walter.

[Marcelo Morais]

Hi,

 take a look at the Internal Dependencies info, there is a 'Recommended Minimum Software Version' column ... version 2.1(3g) appears in 'Servers' and 'Adapters' ... I always prefer to upgrade first to the recommended minimum.

Hope this helps.