USC F999984 FSM:Failed PowerCar Error after frimware

[Trevor.CrazeGC]

Hi,

We have a ucs b5108 and after upgrading the firmware from 1.3 to 2.13 this has enabled the power cap feature we are now getting A Critical error 

Code F999984

FSM:Failed Cap the power consumption of the cassis (FSM:sam:dme:EquipmentChassisPowerCap) this looks like on of the blades it telling the chassis it is consuming more power than the chassis can provide 26824232W when the power supply is only 500W

Has anyone see this before?

[Keny Perez · Accepted solution]

Trevor,

It's very likely you hit https://tools.cisco.com/bugsearch/bug/CSCub90055/?reffering_site=dumpcr just keep going with the upgrade and be sure it is completed successfully and let us know if the issue is still present after the upgrade is 100% complete.

-Kenny

[Trevor.CrazeGC]

Hit the nail on the head the second IOM was the issue reapplied firmware this erro has now gone

Thanks

[Keny Perez]

Glad to help

-Kenny