11-16-2017 12:09 PM - edited 03-01-2019 01:21 PM
In a scenario in which I have I have associated a vHBA to a VSAN with multiple interfaces and also associated with a ping group, in case of failure
will the repining be done to another interface of the same VSAN or due to the ping group configuration havéra repining?
Note: I use Brocabe in the SAN so I do not use port channel.
Thanks to anyone who can help.
Solved! Go to Solution.
11-16-2017 12:24 PM
Right, you are pretty much telling the vHBA "You are only to use this uplink, if it fails, remain down until it comes back online"
If you want to dynamically re-pin to another uplink, just let the UCS select the pinning for the uplinks. It will evenly distribute the load over all uplinks.
11-16-2017 12:19 PM
If you use a pin group for your vHBA, if the port fails, the vHBA will not failover to another uplink.
11-16-2017 12:22 PM
In other words, vHBA ignores the VSAN configuration for multiple interfaces, correct?
11-16-2017 12:24 PM
Right, you are pretty much telling the vHBA "You are only to use this uplink, if it fails, remain down until it comes back online"
If you want to dynamically re-pin to another uplink, just let the UCS select the pinning for the uplinks. It will evenly distribute the load over all uplinks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide