cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5176
Views
15
Helpful
5
Replies

Warning on B480 running 2.3 firmware

Dan Laden
Level 1
Level 1

I am getting the following message on one of multiple B480s with 1340/1380 mezzanine cards.   All blades have the same host firmware package.  Downgrading/Upgrading did not help.  Running version is 4.2(3a).  I did not see this in the release notes.

 

Properties

Affected objectsys/chassis-1/blade-1/mgmt/health
MezzRetimerVer : Please check the Health tab for more details
1688256
management
health-warning
F1704
1
Warning
Warning
Warning
1 Accepted Solution

Accepted Solutions

pranavgu
Level 1
Level 1

I am guessing you might be hitting the bug below.

 

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvg39099/?reffering_site=dumpcr 

 

Please follow the step below and check if the issue is getting resolved or not.

 

1. Power off the host.

2. Reset the CIMC.

3. Power on the host.

 

Capture.PNG

View solution in original post

5 Replies 5

pranavgu
Level 1
Level 1

I am guessing you might be hitting the bug below.

 

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvg39099/?reffering_site=dumpcr 

 

Please follow the step below and check if the issue is getting resolved or not.

 

1. Power off the host.

2. Reset the CIMC.

3. Power on the host.

 

Capture.PNG

Thank you for the quick response.  Looks to be my issue.  Will need to schedule an outage.

Dan did you have time to reboot and see if it cleared? Running into the same issue on the same version. 

I have not been able to reboot at this time. Pending a CM window.

this resolved the issue.

Review Cisco Networking for a $25 gift card