Greetings.
Did this occur after you have already run the #zoneset activate name zoneset-abc vsan xy?
Are all the zones in question defined within the same zoneset/vsan?
When you run #show zoneset active is the named zone missing?
If the 1st zone was re-added or modified, you should be able to just re-activate the zoneset its a member of.
If your 1st zone members are simply missing the * next to the fcid/pwwn, then they are not FLOGI'd into the fabric, and you'll need to research the ports you expect those wwpn's to login on.
Thanks,
Kirk...
