05-24-2021 01:12 PM
Hi experts
im having a problem, after making the upgrade for the CIMC
when i went back to the CIMC upgrade utility, shows me that CIMC and BIOS have a mismatch value and all other componentes were upgraded
i search for commands via ssh, and connect to the CIMC
and activite the version via this way, and then reboot
activate
show detail
Firmware Image Information:
Update Stage: NONE
Update Progress: 100
Current FW Version: 4.1(2b)
FW Image 1 Version: 4.1(2b)
FW Image 1 State: RUNNING ACTIVATED
FW Image 2 Version: 2.0(9c)
FW Image 2 State: BACKUP INACTIVATED
Boot-loader Version: 4.1(2b).36
Secure Boot: ENABLED
i dont have access to the GUI for this terrible java application that its not supported by webbrowsers
so, the only connection i have is CLI o physical, so am i missing something else?
can you help me with that?
Solved! Go to Solution.
05-24-2021 01:56 PM
Try to clear your browser cache or access the CIMC GUI from a new browser / incognito window. After CIMC 4.1 Java/Flash is deprecated and access for CIMC GUI is via HTML5
05-24-2021 01:56 PM
Try to clear your browser cache or access the CIMC GUI from a new browser / incognito window. After CIMC 4.1 Java/Flash is deprecated and access for CIMC GUI is via HTML5
05-24-2021 05:08 PM
Hi Wes, thanks a lot, that was the problem, i could not log in to the new CIMC
and i was getting worried about it, now i have access, thanks a lot for your time, best regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide