Our Current UCS firmware is at 2.2 (5b) and are planning an upgrade to 2.2 (8g), and are currently using the B200 M3 and M4 Model Servers and running Esxi 6.0.U2 with Version: Version 220.127.116.11 fnic & Version: Version 18.104.22.168, enic drivers.
After the UCS firmware Upgrade to 2.2 (8g) and the Server firmware Upgrades , Do i also need to upgrade the fnic and enic drivers or can i plan to upgrade to Esxi 6.0.U3 and this will take care of the enic and fnic drivers ?
Understood, to clarifiy further. I need to upgrade the enic/fnic only after a server firmware is upgarde not otherwise, as i will have to plan it out on multiple days. After the Infrastructure is upgraded.
Additional Information I am revieng the Internal Dependencies for upgrade from 2.2 (5b) to 2.2 (8g) and the table shows Minimum Qualified Software Version & Recommended Software Version. What does this Say can u give an example and will it affect my upgrade.
I am running FI 6296 and B200 M3 and B200 M4 hardware currently at 2.2 (5b)
There is a prevalence of network threats across the world, and the rate, at which these threats continue to emerge, is more rapid than ever before. Cisco Next Generation Firepower (CNGFW) security technologies is information security service that provides...
Upload the Script to Datastore
1. Browse to any Datastore of ESXi Host2. Upload the folder "lsigetvmware_022817" ex. Suppose the datastore name is "Datastore3"
Run the Commands
Enable SSH of ESXi Host
SSH to ESX...
SymptomsCisco Prime is unresponsive. Web GUI will not load. Device doesn't respond to ping.DiagnosisPrime chassis is off.SolutionSince the CIMC uses Flash you can no longer use your bowser. SSH to CIMC address instead. show chassis detailChassis:Powe...
Very first data cloud — Evolution of data lake to hybrid cloud
Today, in this digitized world, data is being generated at a very high rate and from many different sources, and it is growing exponentially in many use ca...
PXE (Preboot eXecution Environment) Server allows unattended or automated OS installation over the Network. The main benefit of pxe is that we don’t need any bootable drive to boot OS(Operating system) and we do not need to to burn any ISO file into DVD o...