Does UCSM support SMB v2 for authentication purposes?
Hope everyone is doing fantastic!
I have a customer who wants to upgrade to Windows Server 2016, as far as I know SMB v1 is not installed by default in that windows server release, however my customer has their environment running SMB v1 for UCSM authentication purposes over 3 years and he is concerned about that once they do the upgrade to WS 2016 that the UCSM is not going to be able to handle SMBv2.
I tried to find Cisco Documentation about compatibility with this specific protocol, but I could not find something related about Authentication purposes,
Have you ever heard/observed scenarios by using SMBv2 for UCSM authentication purposes?
I would really appreciate all kind of help if possible,
Mega raid option does not appear when the server comes to the bios screen, I see the Megar aid PCI card when I look at the bios but I can not do in the configuration because all setting is disable. There are three from this server and they all have t...
•This field guide is meant to be used by customers for cleaning up an existing HyperFlex Edge deployment for the purposes of reinstalling.
•The procedures in this guide are DESTRUCTIVE. Make sure all VMs and data are backed up before proceedi...
i have installed two numbers of cisco VIC 1385 card on UCS C240M5 server but in CIMC VIC adapter section only one card is listed. i have installed the cards in slot number 4 & 5. in VIC adapter section only slot 5 is showing. In PCI adapter i could se...