UCS C200 M2

[adebola.kuku]

Hi everybody,

I have the below UCS server with the part number and description:

Part Number ==> R200-BUN-2 

Description ==>UCS C200 M2

Hard Drive ==>250Gb SATA 2 qty

I want to add a RAID controller to it, please suggest to me the type and part number of the RAID controller to use.

Br

kuku

[abbharga]

Hi Adebola,

Here are the URLs to the spec sheet for the C200 M2 servers:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/c200m2_lff_specsheet.pdf

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/c200m2_sff_specsheet.pdf

Depending upon the server you are running, refer to the sheet to choose the controller.

Pleae note these servers are out of sale now, plese check the cisco ordering tool for the availability for the adapter.

Abhinav

[Zaira Vega]

You can also check this link out:

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/RAID.html#wp1015625

[syedal3]

Hi Adebola,

Please note that C 200 M2 is eos (end of sale ) now ,kindly check the link mentioned below for more information and replacement part numbers hope it may help you

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps11369/end_of_life_notice_c51-715765.html

Syed

[Manuel Velasco]

Product ID (PID)	PID Description
UCSC-RAID-C-4I4E	LSI MegaRAID SAS 9280-4i4e
R200-PL004	LSI MegaRAID SAS/SATA 9260-4i
R2X0-ML002	LSI 1064E 4-port SAS/SATA RAID 0/1 Mezzanine

Here is a list of the supported raid controller for the server that you have. You can also use the raid onboard controller since this controller supports SATA drives the only problem with this controller is that  ESXi is not supported on it.

“Note The integrated ICH10R RAID controller is not compatible for use with VMWare ESX/ESXi Server software in any generation or version of the Cisco UCS C200 server.”

( http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/RAID.html)

If you open the link below and go to page 17 of this PDF you will find more information about the controllers mentioned above.

STEP4 SELECT RAID CONFIGURATION (page 17)

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/c200m2_lff_specsheet.pdf

[Tausif Gaddi]

Please check mentioned link, I hope it will help.

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/RAID.html