UCS Manager Issue

[Cristobal Segovia Tapia]

Hi,

i have problem with Cisco UCS manager, after logging in UCS Manager i get an error.

[Charles Hill]

Take a look at bug CSCta94641

CSCta94641

Save Bug

Fatal Error: Event Sequencing is skewed msg when coming back from sleep

Problem Description:

When waking up from sleep, UCSM GUI will detect an event sequencing error and display the error: "Event Sequencing is skewed", as the JRE doesn't have a sleep detection mechanism.

Workaround:

Always shutdown UCSM GUI before putting your computer to sleep.
 

Hope this helps,

Please rate helpful posts.

Thanks. 

[Cristobal Segovia Tapia]

Hi Charles,

I tested it with windows 2003 server and 2008 virtual machines, these will not enter sleep mode and the problem persists.

[Charles Hill]

If you close the gui and retry, is it successful?

Here is a troubleshooting guide.

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting.html

However, it references that same issue with going to sleep.  

[Cristobal Segovia Tapia]

Thanks! 

[Keny Perez]

What UCSM version?

Can you reproduce at will? If yes, what steps do you take to make this happen?

Do you really get logged out? what happens if you just try to close the pop-up window? are you kicked out?

Any recent change in the firmware or Java version?

Does this happen when connecting through a PC?

-Kenny

[Cristobal Segovia Tapia]

Hi Keny,

What UCSM version?

-Cisco UCS Manager - 2.0(1s)

Can you reproduce at will? If yes, what steps do you take to make this happen?

- Yes, Open the UCS manager 

Do you really get logged out? what happens if you just try to close the pop-up window? are you kicked out?

-I always off, close the window and closes all

Any recent change in the firmware or Java version?

-1.6

Does this happen when connecting through a PC?

-Yes. really all host including laptop, pc, vm.

- See more at: https://supportforums.cisco.com/discussion/12535226/ucs-manager-issue#sthash.PBGJWxaO.dpuf

[Keny Perez · Accepted solution]

Cristobal,

This is definitely a bug cause UCSM is not doing what it is supposed to and the only bug that really fits (based on the version you are running) is  https://tools.cisco.com/bugsearch/bug/CSCum95854/?reffering_site=dumpcr ; and seems to be fixed in the latest versions...  2.2.2c; 2.2.3a; 2.5.1a; 3.0.2c (UCS Mini)

Advice is to contact TAC for further assistance (if required).

-Kenny

[Cristobal Segovia Tapia]

Hi keny,

The problem is resolved with a update to version 2.2(3g).

Thanks!

[Keny Perez]

Glad to help Sir!

-Kenny