Unified Computing System Discussions

Hello, looking to clear out all of the port statistics in UCS Mgr for FC and Eth ports. Not sure how, found nothing helpful ... CLI commands welcome also.ThanksB

HiI want to get traffic Infomations from UCS (all statistics infomation)Though I know  I can get this infomation with GUI , what I want to do is using CLI not GUI.anyone who knows how to get this infomation via cli , let me know 

Hi AllWhat is the difference between inband mgmt IP and outband mgmt IP and How could I configure the inband as when I tried to configure it I received the following error:vlan"xyz"resolved to unsupported vlan ID as in attachedBTW the procedure I use...

Has anyone been able to setup UCS monitoring using snmp v2c for Solarwinds? Documentation seems scares on the interweb and the Thwack support forum on Solarwinds is not very helpful. Does anyone have any good writes up on how to set it up?

Hi; Im using a Cisco UCS 240-M3 server, I have 24 x 600 GB SFF 10K rpm disk, and Im build a Raid10 2 span 10 + 10 disk. 4 global hot spare. Raid Config;Strip Size : 256KDrivers per span : 10Span depth : 2Access-Policy: Read-WriteCache Policy : Cached...

Good morning to all, we just purchase an UCS C220 M4-S, but we only have one HDD, we are still waiting for the second one.I guess there is no problem in start working with VMware and the final VM, and later when the second disk is here make the RAID ...

Hiis UCS central ver 1.1.1b support storage cloud like local zoning and direct attached storage as in version  2.1(3b) ?it seems that this is possible to make a connection policy on the UCS C. ?/Ola

Using Central 1.3(1a) I'm trying to delete some sub organizations that were created as test orgs. Using the old "GUI" I right click and select delete it asks to confirm. I do so and nothing happens. When I try to delete using the new "GUI", it return...

We have two chassis in our lab that were bought with only two power supplies.  It's only lab, so not really concerned about power redundancy here.  Is there a way to disable all the alarms not having redundant power causes?  Just want to clear the cl...

Hi,I want to add Multiple VLANs in vNIC Template through CLIPlease suggest how I can achieve this ? because selecting approx 400 VLANs via GUI is pain-Amit

Hello, As soon as I create boot policies zoning is done ( verified with sh zone command, I can see many zones) yet all the Cisco validated designs and the Cisco example below show that initiator group is required (created during the Service Profile w...