01-24-2020 01:22 PM
Hi Experts,
Neither the Intersight Help Center nor the Cisco HyperFlex Systems Installation Guide for Cisco Intersight specify which IP addesses need to be able access svc.intersight.com
For full control (i.e. to be able to open UCSM, HX Connect and KVM access) is it
Can anyone give me this vital information?
Solved! Go to Solution.
01-27-2020 08:59 PM
Hi Chris,
I've included the SCVM Data IPs in the list as well just to make sure the question is clear about which SCVM IPs we are talking about.
Hope it is clear now.
Please feel free to ask question again :)
01-26-2020 10:33 PM
Hyperflex - The IP address is of HXDP(HX device connector ) which is running on HX controller VM is used for access to svc.intersight.com
Hope this will help
01-27-2020 12:36 PM
Hi @AFROJ AHMAD ,
Thanks so much for your reply. Let me find tune my question with an example:
Lets say I an installing a Hyperflex Cluster of three nodes using Intersight .
The following IPs (1-3) have been assigned manually, and the UCS Cluster claimed in Intersight.
The other IPs will be assigned by the Intersight Installer. But we have to make sure that at least some of them have access to svc.intersight.com
I've included the SCVM Data IPs in the list as well just to make sure the question is clear about which SCVM IPs we are talking about.
TIA
01-27-2020 08:59 PM
Hi Chris,
I've included the SCVM Data IPs in the list as well just to make sure the question is clear about which SCVM IPs we are talking about.
Hope it is clear now.
Please feel free to ask question again :)
01-27-2020 09:21 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide