About Mhon Baul

Mhon Baul · 07-18-2012

good day,i'm reading the BYOD document and found out that the switch and ap's below are the only listed on their designed, does it mean normal 3560's and 11xx AP's series can't support BYOD solution using ISE? could someone confirm please?cat switche...

Mhon Baul · 05-28-2012

Hi All,Could someone confirm if the below nexus 5020 nx-os version and type/revision of my GLC-T is compatible with each other? I noticed also the "Transceiver calibation is invalid" when i do show int e1/8 transceiver details , what does it mean?UT...

Mhon Baul · 06-23-2011

Hi All,We got requirements from our Emergency group that they need one DID to be use for recieving emergency calls and this DID will be distribute to 6 IP phones. And if all the IP phones are busy or no-answer they want to forward it to one mobile #...

Mhon Baul · 03-10-2011

Hi All, I would like to reload my FWSM configured in failover mode, the switch is in VSS mode. Is the command "hw-module module # reset" will reload the two pair FWSM or only the active one? thanks in advance!cheers!reymon

Mhon Baul · 02-23-2011

Hi All, I'm in th process of configuring FWSM to relay DHCP request from the client pc/ip phone going to our DHCP server. But the thing is, my client pc/ipphone are not connected directly to FWSM instead i have a L3 switch for the data/voice vlan an...

Mhon Baul · 11-19-2014

Have you tried removing the native vlan on below config since the ASA FW doesn't support this feature? interface Dot11Radio0.1 encapsulation dot1Q 1 native!interface GigabitEthernet0.1 encapsulation dot1Q 1 native HTH -Reymon

Mhon Baul · 11-19-2014

Hi Steve, Can you do a show ver from your ASA? You should have a "security plus license" in order to configure trunk port on ASA FW. Please rate if this is helpful. HTHReymon

Mhon Baul · 11-19-2014

Have you tried connecting the asa trunk port to a cisco switch with a trunk port? I believe your ap connection is directly connected to the firewall. HTHReymon

Mhon Baul · 02-14-2013

Hi Evidio,Can you include also the route-map configs:neighbor *hidden* route-map Central-FL-routes-in inneighbor *hidden* route-map Central-FL-routes-out outAlso, from a machine, you can do traceroute to identify where your routes are heading to..HTH...

Mhon Baul · 05-28-2012

Yes, you are right. 5020 support 1G starting from port eth1 - eth16..

Member Since	‎09-16-2008 07:04 AM
Date Last Visited	‎12-13-2023 12:23 AM
Posts	95
Total Helpful Votes Received	5

User Statistics

User Activity

access switch and ap's for BYOD

Nexus 5020 and GLC-T

Inbound Emergency call?

reload FWSM in VSS Mode

FWSM DHCP-Relay

Have you tried removing the

Hi Steve, Can you do a show

Have you tried connecting the

2 routers 2 ISP's

Re: Nexus 5020 and GLC-T