About M. G.

M. G. · 10-13-2020

Hi all,Has anyone successfully implemented epvn/mpls between asr1001 and asr9000. My test setup is f...

M. G. · 02-04-2018

Hi, when you say "the first ISP goes down" what do you mean by that? Is it the physical link or ISP ...

M. G. · 02-04-2018

Outgoing interface is the one where you want to send all traffic to. e.g. if you have a core switch ...

M. G. · 01-31-2018

Hi, you can 1. configure static default route and redistibute it into EIGRP or 2. use summary addres...

M. G. · 01-31-2018

Hi, show ipv6 ospf [process-id] [area-id] interface [type number] regards, mg

M. G. · 01-30-2018

what exactly are you trying to do?

M. G. · 01-30-2018

You are welcome. Please don't forget to rate helpful posts. Regards, mg

M. G. · 01-29-2018

Unfortunately, last version supported for 5520 is 9.1. ASA introduces BGP in 9.2. Check the release ...

M. G. · 01-29-2018

Hierarchical QOS does exactly what you need. It allows you to shape the traffic to the sub-rate spee...

M. G. · 01-29-2018

Hi, Dynamic paths are created using Constrained Shortest Path First (CSPF) to determine the best pat...

M. G. · 01-29-2018

Hi, you can go with either 5516 or even 5508, all depends on the performance you need. If your 5510 ...

M. G. · 01-29-2018

Hi, As per the nat order of operations, packets on the NAT outside are first translated and then rou...

M. G. · 01-28-2018

The problem you are having is not a routing but security problem. You want to block all traffic betw...

M. G. · 01-28-2018

Hi, I can't check the file as it is blocked in my network. The suggestion is the following. Have to ...

M. G. · 01-28-2018

Hi, Looking into your diagram first thing that comes to my mind is QoS. Maybe there is a lot of broa...

Date Registered	‎01-11-2007 04:25 AM
Date Last Visited	‎10-14-2020 12:05 AM
Total Messages Posted	42
Total Helpful Votes Received	44

EVPN/MPLS ASR9000 with ASR1000