Hello!I have ISR 4331, Cisco IOS XE Software, Version 16.06.07 and ASA 9.9.2.59 with RESTful API.Can I operate ASA via REST API directly from the router, for instance run a python script to change an ACL ?
Hello!We have a Nexus C3548P-10GX.sh license usageFeature Ins Lic Status Expiry Date Comments Count--------------------------------------------------------------------------------24P_LIC_PKG Yes - Unused Never -24P_UPG_PKG No - Unused -LAN_BASE_SERVI...
Hello!I've typed show running-config interface GigabitEthernet 9.500 and show running-config interface GigabitEthernet 1/0/1 in the CLI respectively.At the same time of typing those commands I've captured the TACACS+ accounting packets with Wireshark...
Hello!According to this datasheethttps://www.cisco.com/c/en/us/products/collateral/switches/nexus-3548-switch/data_sheet_c78-707001.htmlswitching capacity for 3524-X is 480 Gbps. If I will install N3548-24P-UPG= (Nexus 3524 additional 24 port license...
"Group-Async 1 GigabitEthernet 1 0 1" - is not GigabitEthernet1/0/1 at all. So I do worry about it, because it is not internal formatting only, but sent to accounting log as well. For example, NX-OS does not do that. If it is "Ethernet1/1" in the CLI...