Hi,is it posibble to create an one-time password on ASA for VPN access?I googled a little bit and found out some solutions with one-time servers from other vendors. I wonder if this is possible without additional hardware/software.
Hi,is it possible to interconnect a UC540 with a CUCM?I think that it is not possible because I did not find anything in the configuration guide on cisco.com, but I would like to hear it from you guys, too.
Hi guys,I have a weird problem on a IOS router.I need to implement IPSec L2L VPN.Because of security requirements every site need an own pre-shared key. The sites have dynamic IP's and that iswhy I am using dyndns.crypto isakmp key KEY hostname XXXXX...
Hi,can you please take a look and the interface counters:Vlan2 is up, line protocol is up Hardware is EtherSVI, address is 00d0.0311.bc0a (bia 00d0.0311.bc0a) Description: XXXXXXXXXXXXxxxxx Internet address is 10.10.0.1/16 MTU 1500 bytes, BW 100...
Hi,we have a Cisco/Scientific Atlanta D9034 encoder and a D9887B decoder.The encoder is streaming some video and I get this stream on my laptop using VLC player.I need this stream on our decoder that is located on another location and the stream is ...
This is great.I know that CME and be connected with a CUCM, but I was not sure if the UC500 is using the same CME. I am not a Voice guy .Both posts are helpful and I will rate it.Thanks.
Hi,I managed to solve this one.Adding the default command under the crypto map helped me.set peer HOSTNAME dynamic defaultYour idea is great too. I have not tried it but I am sure that it would work.Do you know how to get lesser downtime when the re...
Do you have an idea why the switch is droping packets?Even when I ping the switch locally, I get packet loss with a normal windows ICMP.When I ping the swtich on 4AM, the ICMP reply is normal.So the switch is definitely overloaded.On a previous discu...
OK, I got it to work. I type a normal host IP Address in the field where I have to type the multicast address and i have TS and Input presence.The problem is that the 6500 switch and the access switch does not know the MAC address of the TS interface...