HI i am trying to send trafic to sflow connector 1 vrf to anotehr wan vrf switch(config)#Route-map VRF_TO_EIGRPswitch(config-route-map)# match ip address 10switch(config-route-map)#exit!!switch#show ip access-lists 1010 permit 172.16.10.10switch(co...
HI Team While calling a ext number 2067 i need to issue a promt saying the number is changed call 12234. for this i created cti route point as 2067 and assign that to Line group Image attached LG and attached the sample what i did for huntpilot...
Dna GUI not loading getting the below error {"message":"no route and no API found with those values"}servies are running please find the below screen i have tried on physical and virtual both same error .
HI All Please find the attached config Pc is not getting the ip address while opening the redirection url getting the below error https://ise-01.rl.local:8443/portal/gateway?sessionId=8E6440FE0000001100DFAF7D&portal=f189d6e0-7159-11e7-a355-00505...
HI Team When users are connecting to the corp-SSID they are getting the ip from the WLC management sub net . In the flex connect i have set the Vlan and tested too but still no luck . WLC issue, Other Wireless-Mobility Subjects Below is AP detail...
HI BB tthe current snap is from VM i have followed your link bt used only 1 interface https://www.balajibandi.com/?paged=3the version i have installed is DNAC-SW-1.3.1.7 below the output of maglev package status please canyou help
Portal is working after recreating the certificate but the machine is not getting ip i have given static ip it works Please can any open help on ip past