Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I'm trying to come up with a couple of ACLs to block traffic in the same router from two of its interfaces (if possible). The only purpose of this router is for internet access only that will be used for one of our wlans. One interface is for ...
Hello,I'm just wondering if anyone has come across this issue before and maybe can provide a solution. We are in the process of replacing our WiFi gear and we have two new engines that provide NAC and as part of our initial testing we moved one of ou...
We have 6 WLCs 3 on two of our major locations running 8.3.150 software version. We will be replacing our wireless gear so we will not be updating these WLCs and we are changing vendors. We will not be upgrading the gear until probably at the end of ...
This one is strange to say the least. About a week ago some devices (Two mac pros and two other devices not windows OS) aren't getting a valid ip address but getting an address from 0.0.0.x with mask 255.255.255.0. The cisco router has a basic config...
Hello, Just a quick question about Cisco ASA. Why do I receive a prompt that the configuration has been changed when I'm trying to exit the ASDM tool even though I did not change anything. All I did was to use the ping and tracert tool but did not mo...
@Georg Pauwen Hey I tested the ACLs and it worked I now have communication between hosts in the same subnet only. I used two acls one for each interface. I appreciate it
@mlund Hey thank you I will pass this option to the senior eng and see what he thinks. Unfortunately, I think they want to have the 3 physical interfaces at this moment but it is a good option I appreciate it.
Hello @Georg Pauwen thank you for the quick response, I just noticed I forgot to add the interfaces in this example. Another thing I think I need to clarify is that the router should only have access to what I'm calling the mgmt subnet in this examp...
We are using eap tls and with Android since we have the option to select do not validate cert i think that's why we are not seen the issue? I'll try to get that Monday and see if I can share it. Just a quick question I understand how the cert would a...
WLC 5508 and AIR-CAP3502I-A-K9 APs. We are using AVAYA IDE and we will be using Extreme NAC soon for all our WLCs. We will be using extreme WLCs but right now we are just testing the rules so we have Cisco WLCs and cisco APs using extreme NAC for Rad...
