Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,
I am trying to setup additional servers connectivity in my university Data center.
Back in my research center I have 34 servers + storage ( Site A)
I have another 20 servers nodes need to be placed inside university DC ( Site-B )
I hav...
Hi Team,
For Data center , i am using a 1x pairs of N5k and 2x paris of N2k for supporting servers connectivity.
Then for the DR site, which the number of servers will be greatly reduce and I do not required 1 pairs of N5k and 2x pairs of N2K.
Mea...
Hi Team,
Do I need every N5k pairs for each VDC create in N7k ?
Below show 4x pairs N5K , can i do with 2 pairs instead of 4x paris N5k ?
------N7k-1 -------- ...
Hi Team,
I will like to set the Nexus N7k , N5k and N2k with 2x VDC ( VDC-A and VDC-B )
I see most VDC setup with N7k and N2k , each N2k will be direct connected to N7k port with particular VDC belong to.
Meaning to say server required VDC-A wi...
Hi Team,
Possible to configure static IP address for AP3802 ?
I believe it can be possible , but do I configure from WLC or using direct console cable from my personal PC ?
Rdgs
Gary
Hi HTH,
If I have 4x VDC, N7k-1 at DC-1 and N7k-2 at DC-2
All the N2k at DC-1 ( 12x N2K at DC-1 ) , can it connect thru 2x N5k ( DC-1) and to N7k-1 for access all 4x VDC ??? If yes , meaning to say just one pair of N5k will allow to a...
Hi HTH,
If I have 2x units of N3524P-10GX , and I buy just 1 x unit of N3548-24P-UPG=.
Can I split the ports licenses into 2 switches with 12 port per switches ?
Rdgs
Maxim
