Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,I have an issue with my Catalyst 2960X Switches. I have activated ip http secure-server and can login to the web interface with my privilege level 15 admin user. Then I created a read-only user with privilege level 1. With this read user i c...
Hi there!I configured a 2960X switch as https server. I'm unable to access the switch GUI with non privilege 15 user, with privilege 15 user it's working. Does any one know what I could do here?
Hello,for linking mac addresses in LanSweeper with snmp, I had to add following config to all my C9200 Switches:snmp-server group authunitgr v3 auth context vlan- match prefixI have some Nexus 9K with FEX 2K Switches but the command does not work he...
Hello, for linking mac addresses in LanSweeper with snmp, I had to add following config to all my C9200 Switches:snmp-server group authunitgr v3 auth context vlan- match prefixI have some Nexus 9K and FEX 2K Switches but the command does not work her...
Hello, for linking mac addresses in LanSweeper with snmp, I had to add following config to all my C9200 Switches:snmp-server group authunitgr v3 auth context vlan- match prefixI have some Nexus 9K and FEX 2K Switches but the command does not work her...
Unfortunately this thread is not able to help me. The flash:dc_profile_dir/day0.cfg file from this thread does not exist on my switch. In this specified directory i can find only this file: dc_default_profiles.txt
Thank you for this information! We found out that the authentication happens between the client and the RADIUS, the WLC is barely involved here. So the customers server team had do change some registry keys on the RADIUS server to get TLS 1.2 working...
