Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,we have deployed AAR in our scenario.All is working fine except one thing.IP Phone (location A) is calling IP Phone (location B), no bandwidth rerouting via ISDN (location A)Ip Phone (location A) is calling IP Phone (location B), which has been ca...
Hi,in our deployment there is only english language installed.Now we have to install one additional language (Portuguese) to this system.How can we do this?Has anyone done this before?Difficult to find documentations?In IPCC express 4.x it is simple,...
We are using 1760-V and VWIC-1MFT-E1 to connect two PBXs. The 1760-Vs have DSPs for 9 and 6 channels.PBX1<->1760-1<->IP WAN<->1760-2<->PBX2.When the PBX1 is generating a 7th call to the PBX2 and the 1760-2 has only DSPs for 6 calls, a message with no...
Hi,we are using two 1760 with VWIC-1MFT-E1 to connect to PBXs via WAN.We have not enough DSPs to support all channels of the E1.Is there any possibility to transfer the no dsp resources available message to an ISDN Busy event, so that the PBX which i...
Using CM 4.1(3)SR1RTMT was running many times before.Now the application starts, ask for password and does not connect anymore.The configured alarms will be generated.many thanks in advanceThe restarting of the RIS service does not solve the problemR...
The two ports of the ATAs have to be configured in the callmanager like this:Port 1 - Insert ATA186 with mac-address (xxxx.yyyy.zzzz) and add DN.Port 2 - Insert ATA196 with mac-address (xxyy.yyzz.zz01) and add DN.one phys. device but two devices in t...
Have you tried BAT (Bulk Administration Tool).We have done this in our last greater deployment to insert the Login Service for extension mobility.August
